Need service? Call:972-681-2222
|Programming your Genie® Intellicode® Remote|
To make Intellicode® fully functional, you willl need your remote control and to be within reach of your Genie® garage door opener.
A. Locate the “Learn Code” button and indicator LED. Depending on the model, the Learn Code button is usually located under the light cover or at the back of the unit.
B. Press and release the Learn Code button. The indicator LED will blink at a rate of twice per second. Press and release the button on remote control you want to program. The indicator LED will glow steady. Press the same remote control button again. The indicator LED will go out.
C. To check that the button has been programmed correctly, press the button on the remote again. The door should operate. If it does not operate, carefully repeat steps a through c above.
D. Repeat steps a through c for multiple doors and/or remote controllers with multiple button.
Note! Up to seven Intellicode® remote-operated devices can be programmed to one Genie®Intellicode® garage door opener. This includes a total of seven Intellicode® remotes or six Intellicode® remotes and the Intellicode® wireless keypad.
Caution! Before activating the door, be sure that all people, pets, ladders, vehicles and other obstructions are cleared from the door’s path.
Still Having Trouble Programming Your Remotes?
We Will Come To Your House and Program it For You!
These are general instructions on how to program your remotes if they do not work for you please feel free to give us a call and one of our friendly reps will walk you through it at no charge please just have your Manufacturer and Model numbers available. In most cases we will be able to help you over the phone if not we can send one of our technicians out to your house and program it for you at a small fee.
Toll Free 24/7
972 - 681 - 2222
972 - 335 - 5885
817 - 496 - 3000
Visit our facebook page here!